>>> CONFIGURE NOW <<<
 
Abbildung ähnlich
     
This product is currently not available.
Please inform me as soon as the product is available again.

30A 20-60V Baserunner Motor Controller Z910

€289.99 *

Prices incl. 19% VAT plus shipping costs

Delivery time 21 Workdays

  • 3114

E-Bike Controller Baserunner with Z910 motor plug

The Baserunner_Z9 is a compact field-oriented motor controller and enclosure that fits inside the Hailong and Reention downtube battery cradles. It is compatible with up to 14s (58V) battery packs (24-52V batteries, max. 60V output), handles up to 55A peak phase current (30A continuous), and is terminated with an Z910 waterproof HiGo motor plug. V3 Model has a demux circuitry on the white signal wire of the Z910 cable to support motor temperature sensors, wheel speed sensors, and also combined temp/speed signaling. Requires PC setup to mate and configure with a given motor, and this requires this programming cable. If your battery doesn´t have an on/off switch you should expect to wire in a separate switch.

Specifications:  

Dimensions (LxWxH, mm)90 x 55 x 15
Actual Weight0,20 kg
Max. Battery Amps30A
Battery Range20-60V
Low Voltage CutoffProgrammable

 

It has the following 2 signal plugs:

  • 8-pin HIGO plug for connecting Cycle Analyst V3 (CA3-WP)
  • 3-pin JST-SM connector for direct throttle hookup. Inside the heathshrink are unterminated leads for on/off switch and optional fwd/rev inputs.

The Baserunner Z9 has bare + and - lead wires that will need to be soldered to the pins of the connector present in your original base plate (battery slider).

Made by Grin (Canada). More Product information

Available downloads:
Customer evaluation for "30A 20-60V Baserunner Motor Controller Z910"
Write an evaluation
Evaluations will be activated after verification.
Please enter these characters in the following text field.

The fields marked with * are required.

Programmierkabel für
Phaserunner
Cycle Analyst
Cycle Satiator
Cycle Analyst V3 DPS direct plug in with...
€189.99 *
Add to shopping cart
Verlängerungskabel
Display
50 cm
Verlängerungskabel
Hauptkabelbaum
35 oder 57 cm
EMPFOHLEN
110 Nm
Drehmoment
36-52V
TIP!
Cycle Analyst V3 DPS direct plug in with...
€189.99 *
Add to shopping cart
EXTREME
220 Nm
Drehmoment
36-72V
5000W E-Bike Motor CYC X1 Pro Gen4
€1,199.99 * €1,249.99 *
Add to shopping cart
CYC Set Configurator CYC Set Configurator
From €0.01 *
Add to shopping cart
Robust
160 Nm
Kadenzsteuerung
48-52V
TIP!
Kadenzsteuerung
36V
250W E-Bike mid drive motor Bafang BBS01 36V
€499.99 *
Add to shopping cart
Nachrüstsatz
legal
250W
TIP!
250W E-Bike Conversion Kit CYC Photon
€1,499.99 *
Add to shopping cart
EMPFOHLEN
komplettes Set
36-52V
110 Nm
TIP!
S-Trax Snowbike Conversion Kit
€1,999.99 * €2,499.99 *
Add to shopping cart
Bafang BBS Firmware Update
€29.99 *
Add to shopping cart
150 Nm
Torque
36-52V
1500W E-Bike Motor CYC X1 STEALTH Gen3
From €1,149.99 *
Add to shopping cart
50A 30-90V Phaserunner Motor Controller V3
From €339.99 *
Add to shopping cart
Kadenzsteuerung
48V und 52V
Programmierkabel für
Phaserunner
Cycle Analyst
Cycle Satiator
TIP!
E-Bike Buzzraw PRO Coast Cycles
€4,199.99 *
Add to shopping cart
Bafang BBS01 BBS02 axle tool
€29.99 *
Add to shopping cart
CYC E-Bike Configurator
From €0.01 *
Add to shopping cart
TIP!
Battery Safe Bag 200 x 140 x 600 mm
€59.99 *
Add to shopping cart
Viewed