>>> CONFIGURE NOW <<<
Kostenloser Versand ab € 200,- Bestellwert
Schneller Versand vom Lager DE und AT
Kostenlose Beratung
Kostenlose Hotline 0800 123 454 321
 

Tools for Bafang and CYC

You are looking for the right tool to mount your Bafang or CYC E-Bike Motor? In this category you will find it. For mounting Bafang BBS motors we recommend to use both nuts (axle tool locking ring nut), as the right torque can be considered. Alternatively the M33 spanner can be used. For CYC motor installation we reommend using the CYC bottom bracket wrench. For removing your bottom bracket, you may need our bottom bracket puller and crank puller tool - but this depends on your bike. More details can be found in the product description.

No results were found for the filter!
CYC Photon Chainring Tool
Tool for loosening the Photon Chainring This tool makes it very easy to remove the chainring from the Photon Motor. Simply place the pins in the holes provided on the chainring retaining cover and then use a wrench (with nut) to loosen...
€39.99 *

In stock,
Delivery time appr. 1-8 workdays

Bafang BBS01 BBS02 axle tool
To remove both lock nuts on Bafang BBS01/02 axle With this tool it´s easy to remove both lock nuts on the axle of the Bafang BBS01 and BBS02 motors. This is necessary if you want to change the bearings behind, the PAS disc, clutch or...
€29.99 *

Delivery time 21 Workdays

CYC bottom bracket wrench Hollowtech II
Mounting wrench for CYC Motors This tool can be used to mount mid drive motors, as well as to dismount the bicycle bottom bracket: Mounting: BB Cup of CYC Motors (Photon, Pro, Stealth) 2nd Lockring of Bafang BBS01/02/HD Motors...
€19.99 *

In stock,
Delivery time appr. 1-8 workdays

Demontagetool
für Vierkantkurbeln
Bike Crank Puller Tool for Square Taper Cranks
Crank puller works with Bafang BBS01/02/HD and CYC cranks! In addition it can be used also for other standards. You can use a 15 mm wrench for both parts. We recommend to use blue Loctite on the crank screws when you mount the cranks...
€12.99 *

In stock,
Delivery time appr. 1-8 workdays

Demontagetool
Innenlager
Octalink
Bottom bracket puller for Octalink, ISIS,...
Right Tool to remove the bottom bracket Cartridge B.B. tool to remove the original bottom bracket of your bike and make space for your new Bafang. It´s also necessary for mounting the CYC Motors of Gen2 (not Gen3 and 4) - to fix the part...
€9.99 * €12.99 *

In stock,
Delivery time appr. 1-8 workdays

EMPFOHLEN
Montagetool
für 2. Sicherungsring
Drehmoment
Ausbau Hollowtech 2
TIP!
Bafang BBS axle tool locking ring nut second ring
Tool for mounting Bafang BBS Motors Use this CroMo-Steel tool with a 1/2" torque wrench to fix the second lockring. Blue Loctite use on the thread is also recommended. You can use it also to unmount the BSA Shimano Hollowtech and SRAM...
€29.99 *

In stock,
Delivery time appr. 1-8 workdays

Chain Wear Indicator
For checking the wear-related elongation of bicycle chains for aluminum cassettes or steel A chain can still be fully functional, but from a certain degree of wear it does not fit exactly in the sprockets. During use, the chain lengthens...
€11.99 *

In stock,
Delivery time appr. 1-8 workdays

Montagetool
Alternative zu Nussen
für Sicherungsringe
Ausbau Hollowtech 2
Bafang BBS M33 mounting tool axle screw and nut
Mounting tool for Bafang BBS Motors With this tool you can fix both mounting lockrings of Bafang BBSHD, BBS02 and BBS01 mid drive motors. The disadvantage compared to both mounting nuts: The recommended torque can not be observed. In...
€24.99 * €29.99 *

In stock,
Delivery time appr. 1-8 workdays

EMPFOHLEN
Montagetool
für 1. Sicherungsring
Drehmoment
Bafang BBS axle tool locking ring nut M33
Mounting tool for the first lockring to mount your Bafang BBS01, BBS02 and BBSHD motor Recommended torque is 50-60 Nm, Material: made of steel Use this tool with a 1/2" torque wrench, blue Loctite use on the thread is also recommended....
€34.99 *

In stock,
Delivery time appr. 1-8 workdays

Questions about these tools?

If our detailed product description can´t answer all your questions, please write an email or give us a call - we will help you!

Viewed