>>> CONFIGURE NOW <<<
 
1 From 7
No results were found for the filter!
CYC X1 Pro Antriebskettenblatt 219H
72T 219H Antriebskettenblatt für den CYC X1 Pro Motor. Nur mit Freilauf 1.0 kompatibel. Am Antriebskettenblatt kann ein Standard-Kettenblatt mit 104 BCD montiert werden. Nicht mit X1 Stealth Motor kompatibel.
€59.99 *

Ready to ship today,
Delivery time appr. 1-8 workdays

E-Bike Headlights CYC
E-Bike Headlights from CYC These headlights from CYC are ideal for riding at night or in poor visibility. They have 2 light modes - high beam and low beam. Included are 2 lights for the front sidde - these are mounted on the handlebar...
€89.99 * €99.99 *

Delivery time 21 Workdays

CYC X1 Pro Complete Gearbox
This gearbox fits the CYC X1 Pro Motor (not compatible with Stealth Motor) and is located directly on the motor. The planetary gearox comes with brass gears. Also included is a Mollykote grease bag to lubricate the gears.
€299.99 *

Ready to ship today,
Delivery time appr. 1-8 workdays

CYC X1 Pro and Stealth Freewheel 2.0
This freewheel is compatible with the corresponding 2.0 219H chain sprocket of Gen2. BSA and BB92 version use the same freewheel - but with different spacer sets. This freewheel is compatible for both BSA and BB92 Motor Version. Not...
€119.99 * €129.99 *

Ready to ship today,
Delivery time appr. 1-8 workdays

CYC X1 Gen2 Cranks for X1 Pro and Stealth
Square cranks for CYC Gen2 Motors The crank arm length (hole spacing) is available in 165 mm and 170 mm (simply select above). The scope of delivery includes both cranks (left and right). When mounting, the correct pedal side should be...
€69.99 *

Ready to ship today,
Delivery time appr. 1-8 workdays

CYC X1 Stealth Brass Gears
Gearbox brass gears for X1 Stealth Motor These 3 gears are located in the gearbox of the stealth motor and replace the original gears of the planetary gearbox. Also included are the bearings and some grease for lubrication. Dimensions:...
€59.99 *

Ready to ship today,
Delivery time appr. 1-8 workdays

BB92 to BSA Adaptor
BSA Adaptor for BB92 Bottom Bracket With these adapter cups (for left and right side of bottom bracket), the cyc x1 pro and stealth motors (both Gen3) as well as the Photon Motor can be installed on BB92 bottom brackets. The outer...
€29.99 *

Ready to ship today,
Delivery time appr. 1-8 workdays

CYC X1 Pro Motor Sprocket
The small sprocket for cyc x1 pro motor This little sprocket is located on the right side of the motor (underneath the front cover) and drives the golden drive chain. There are 2 different sprockets (select above): 11T (11 teeth): for...
€49.99 *

Ready to ship today,
Delivery time appr. 1-8 workdays

Bafang BBS Second Lockring
For mounting BBS01/02/HD Motors on the Bicycle This mounting ring is the outer lockring. This nut should be tightened with 25-30 Nm. You can use this mounting nut or wrench for doing this. In addition, this 1st lockring is included with...
€14.99 *

Ready to ship today,
Delivery time appr. 1-8 workdays

Bafang BBS First Lockring
For mounting BBS01/02/HD Motors on the Bicycle This mounting ring is the inner main lockring. This nut should be tightened with 50-60 Nm. You can use this mounting nut or wrench for doing this. In addition, this 1st lockring is included...
€14.99 *

Ready to ship today,
Delivery time appr. 1-8 workdays

Bafang BBS Nylon Gear Cover incl. Bearing
Nylon Gear Cover for Bafang BBS Motors This aluminum cover is located directly on the pinion gear and the nylon gear is hidden underneatz - see the following picture: Original Bafang Product. Compatible with Bafang BBS01b, BBS02b and...
€34.99 *

Ready to ship today,
Delivery time appr. 1-8 workdays

Bafang BBS02 Controller 500W 18A Version B
Version B controller for Bafang BBS02 500W Motors The original Bafang BBS02 controller with 500W and 18A. Version B is the new controller-generation. Here you can find the difference between version a and b: The following connectors are...
€159.99 *

Ready to ship today,
Delivery time appr. 1-8 workdays

1 From 7
Viewed