With this configurator you can choose your prefered components for your CYC Photon E-Bike Conversion Kit! If you need the 250W Motor version you can also use this configurator - it is the same motor, only with different firmware. You can leave a comment if you want to get the 250W version. The Photon motor is compatible with different Pressfit- and BSA bottom brackets. You should check this on your bike first. Please click on the motors in the last step to see how this works (measure bottom bracket size). 

The battery connector on the new x6 controller is equipped with an xt90 plug. The Anderson Powerpole connector is used on the battery slider by the manufacturer. So when using our batteries with the cyc motors, we recommend to order the xt90-s connector - this product can also be selected in this configurator.

If you want to use 2 brake sensors in addition to the gearsensor, then the y-splitter cable is required. You can also find this product in this configurator. If you choose 1x gearsensor and 1x brake sensor, then you don´t need this splitter cable.

Note:
Please observe the regulations of your country if you use this drive unit on public roads and paths. If so, you have to adjust the motor settings - in particular max. power, speed and throttle - according to these regulations. The user is responsible for compliance with these regulations. Otherwise, this product may only be used on private and secured terrain!