>>> CONFIGURE NOW <<<
 

Products from GRIN

GRIN
1 From 3
No results were found for the filter!
Cableset for Phaserunner Motor Controller
Different cable sets for Grin Phaserunner Here you can find the different cable sets for use with Phaserunner Controller from Grin. Cable set - please choose above: 1) Battery only (choose "nur Akkukabel") 80 cm High Flex Battery Cable...
From €34.99 * €41.99 *

Ready to ship today,
Delivery time appr. 1-8 workdays

Half Twist Throttle left for Cycle Analyst and...
Split twist throttle left for Cycle Analyst and Phaserunner Throttle for left side mounting Extra Slim OD of 36mm fits under lever shifters and brake lever housings Uses 3 pin JST-SM connector (compatible with CA V3 and Phaserunner...
€31.99 *

Delivery time not available

50A 20-60V Baserunner Motor Controller L1019 V4
E-Bike Controller Baserunner with L1019 motor plug The Baserunner L10 is a compact field-oriented motor controller and enclosure that fits inside the Hailong and Reention downtube battery cradles. It is compatible with up to 14S (20-max....
€349.99 *

Delivery time not available

30A 20-60V Baserunner Motor Controller Z910
E-Bike Controller Baserunner with Z910 motor plug The Baserunner_Z9 is a compact field-oriented motor controller and enclosure that fits inside the Hailong and Reention downtube battery cradles. It is compatible with up to 14s (58V)...
€289.99 *

Delivery time 21 Workdays

Speedometer Sensor for Cycle Analyst
For use with Cycle Analyst Speedometer Sensor for converting a CA-DP into a CA-DPS device. Cable length: ca. 100 cm Manufacturer: Grin Installation and soldering details
€29.99 *

Ready to ship today,
Delivery time appr. 1-8 workdays

50A 30-90V Phaserunner Motor Controller V3
Derzeit nicht lagernd!
From €339.99 *

Delivery time not available

Singatron Connector 15A for Satiator Charger
Output Connector for Satiator Charger Replacement 3 Pin Singatron DC output connector for Satiator charger. Please note this connector is difficult to swap out as there is a filter PCB soldered on directly to the leads inside the...
€19.99 *

Delivery time 21 Workdays

Potentiometer CA3
Allows stepless ebike adjustings while riding 5kOhm Auxilliary Input Pot for CA3 devices with CNC machined aluminium handlebar clamp for securing to 22 mm (7/8") handlebars. Allows you to adjust any of the speed, power, current or PAS...
€39.99 * €46.99 *

Ready to ship today,
Delivery time appr. 1-8 workdays

On/Off Switch for Controller
Replacement on/off switch for motor controllers. Can be used as a more rugged and water resistant upgrade to the rocking toggle switches on older Grinfineon controllers. Includes a waterproof rubber boot. Latching On/Off Push Button...
€19.99 *

Ready to ship today,
Delivery time appr. 1-8 workdays

8A 10-63V Programmable Battery Charger Cycle...
Programmable E-Bike Battery Charger Different charging profiles can be saved and used on this charger. For example: fast charging profile, slow charging profile, 80% charging profile, etc. These profiles can be conveniently created using...
From €429.99 *

Delivery time not available

5A 20-103V Programmable Battery Charger Cycle...
informative display with optional adapter- and programming-cable Sealed and Watertight with Fan Free Efficiency weight 1,06 kg and Impressive Power Density (237x78x48mm) for Lithium (18650), Lead, NiMH, NiCad battery EU Schuko plug One...
From €429.99 *

Delivery time not available

TIP!
HubSink V2 Improved Thermal Dissipation for Hub...
Vastly improve the thermal management and power handling of hub motors with ~200% better overall thermal dissipation allowing much higher power levels or endurance to be achieved. Much better Thermal Dissipation & Performance in...
€124.99 *

Delivery time 28 Workdays

1 From 3
Viewed