>>> CONFIGURE NOW <<<
 

Accessories for Bafang & CYC

Since this category - accessories for Bafang and CYC - is very extensive, we als created subcategories. Included are chainrings, cranks, throttles, mounting tools, sensors, connectors, cables as well as products for Cycle Analyst or hub motors. Many articles in this categories can also be used with other E-Bike systems, for example Cycle Analyst, hub motor items, connectors, cables, etc.

1 From 11
No results were found for the filter!
CYC Photon Chainring Tool
Tool for loosening the Photon Chainring This tool makes it very easy to remove the chainring from the Photon Motor. Simply place the pins in the holes provided on the chainring retaining cover and then use a wrench (with nut) to loosen...
€39.99 *

Ready to ship today,
Delivery time appr. 1-8 workdays

Magura MT5e Adapter Cable Bafang
Adapter Cable for Magura MT5e to Bafang BBS connection The Magura MT5e disc brake is fitted with a red 2-pin HIGO socket by the manufacturer. However, the Bafang BBS brake connection comes with a yellow 3-pin HIGO plug. You will need...
€24.99 *

Ready to ship today,
Delivery time appr. 1-8 workdays

für 68 mm Lagerbreite
TIP!
Bafang BBS Stabilizer
Alternative mounting part for Bafang BBS Motors This stabilizer is an alternative fixing plate for stabilizing the mounting of Bafang BBS motors with 68 mm bottom bracket width. Made of high strength 304 stainless steel, this bar will...
€49.99 *

Ready to ship today,
Delivery time appr. 1-8 workdays

Bafang BBSHD Luna Eclipse 42T chainring
The two-piece chainring made of aluminum has the highest offset to the inside. The Luna Eclipse has an chain offset of approximately 23 mm (Lekkie 42T 18.5 mm). Ideal for a BB92 adapter and 100 mm motors, where the chain has to be guided...
€189.99 *

Ready to ship today,
Delivery time appr. 1-8 workdays

X6 Controller for CYC X1 Pro und Stealth Gen3
Controller for use with CYC X1 Pro und Stealth Motors This controller is a replacement for the ASI BAC855 controllers and is only compatible with X1 Pro und X1 Stealth motors . For an upgrade from Gen2 to Gen3, we recommend installing...
€299.99 *

Ready to ship today,
Delivery time appr. 1-8 workdays

Cableset for Phaserunner Motor Controller
Different cable sets for Grin Phaserunner Here you can find the different cable sets for use with Phaserunner Controller from Grin. Cable set - please choose above: 1) Battery only (choose "nur Akkukabel") 80 cm High Flex Battery Cable...
From €34.99 * €41.99 *

Ready to ship today,
Delivery time appr. 1-8 workdays

CYC X1 Chainring and Sprocket Set Gen2+3
Chainring for CYC X1 Pro and Stealth Motor - incl. cover The chainring consists of 3 parts: Alu cover, drive sprocket and bicycle chainring. This chainring has a Narrow-Wide design and fits for CYC X1 Pro motors. - 11/53T with 32T...
€149.99 *

Ready to ship today,
Delivery time appr. 1-8 workdays

TIP!
150W Solar Panel for charging E-Bike Batteries...
Discover the brandnew 150W Solar Panel! Welcome to the world of mobile energy! Get our brand-new solar panel to charge your E-Bike battery, smartphone, camera or other devices on the go (or also at home) using sun energy. This...
€549.99 *

Ready to ship today,
Delivery time appr. 1-8 workdays

E-Bike Headlights CYC
E-Bike Headlights from CYC These headlights from CYC are ideal for riding at night or in poor visibility. They have 2 light modes - high beam and low beam. Included are 2 lights for the front sidde - these are mounted on the handlebar...
€89.99 * €99.99 *

Ready to ship today,
Delivery time appr. 1-8 workdays

CYC X1 Gen2 Cranks for X1 Pro and Stealth
Square cranks for CYC Gen2 Motors The crank arm length (hole spacing) is available in 165 mm and 170 mm (simply select above). The scope of delivery includes both cranks (left and right). When mounting, the correct pedal side should be...
€69.99 *

Ready to ship today,
Delivery time appr. 1-8 workdays

Bicycle Water Bottle Holder
Bottle holder for your Bicycle This bottle cage is suitable for standard drinking bottles and can be attached to various bicycles with eyelets. For smaller bottles, the upper part of the holder can be adjusted via screw. The base plate...
€14.99 * €19.99 *

Ready to ship today,
Delivery time appr. 1-8 workdays

Bafang BB86/92 Lekkie Adapter
Pressfit BB86/92 Adapter for mounting Bafang BBS Motors The Bafang BBS01/02/HD Motors fit at bottom bracket diameter of 33 mm. For larger bb diameter (such as bb92), an adapter is needed. This adapter fits Pressfit BB86 and BB92 bottom...
€94.99 *

Delivery time 28 Workdays

1 From 11

Questions about one of these products?

If our detailed product description can´t answer all your questions, please write an email or give us a call - we will help you!

Viewed