>>> CONFIGURE NOW <<<
Kostenloser Versand ab € 200,- Bestellwert
Schneller Versand vom Lager DE und AT
Kostenlose Beratung
Kostenlose Hotline 0800 123 454 321
 

More Information

 

 

Equipped with a 12fet controller with 30A and the possibility to use 14S 58,8V batteries, the motor provides 1.6 kW peak! Ideal for the realization of your S-Pedelec as a complete kit for an existing bike. With his powerful and quiet motor with 160 Nm you can climb everywhere. A easy installation and the power transmission on all bike gears also allow long mountain climbs without overheating. The Bafang BBSHD Impulsis is significantly more robust than its little brother BBS02 with 30A constant power available. It has a internal gear ratio of 21.9:1, which allows higher RPMs for a better efficiency.

  • Weight: ca. 7 kg (complete set incl. display, cranks, bolts)
  • Estimated speed with 26" Felge: ca. 60 km/h
  • Motor connector: Anderson PowerPole 45

This motor fits to bottom brackets from 68 to 120 mm:
68 mm = 68 to 75 mm
90 mm = 75 to 92 mm (e.g. Pressfit BB92)
100 mm = 90 to 100 mm
120 mm = 100 to 120 mm
The axle size is measured without the thread. eventually you need some washers, to have a flat triangle plate.

The motor axle has a diameter of 33.4 mm and is installed instead of the bottom bracket. A bicycle frame with BSA bearings (e.g. Shimano Hollowtech) has the appropriate diameter for the motor, with BB92 and BB30 bearings an individual adapter is required. Some of them we have here…

By choosing the motor the following items are included:

  • fixing parts
  • all the necessary cables and connectors
  • speed sensor

 

With this configurator you will find all the necessary and optional components. You can choose between different throttles, displays and chainrings.

You need a special tool for the axle, the second ring can be tighten with the bottom bracket bearing tool for Shimano, SRAM, … For the rest Allen tools are required.

We recommend the use of the Gearsensor to have smooth gear changes.

You can use 48V 13S and 52V 14S batteries, it doesn't work for 36V. You can set also a low voltage cutoff in the programming (40-43V).

Attention: Please observe the regulations of your country if you use this drive unit on public roads and paths. If so, you have to adjust the motor settings - in particular max. power, speed and throttle - according to these regulations. The user is responsible for compliance with these regulations. Otherwise, this product may only be used on private and secured terrain!

Customer evaluation for "POWERSET Configurator 1000W"
Write an evaluation
Evaluations will be activated after verification.
Please enter these characters in the following text field.

The fields marked with * are required.

Choose Display

Gewählte Konfiguration
Choose Display:
Choose Chainring:
Choose Cranks:
Choose Throttle:
Tools (multiple selection possible):
Recommended (multiple selection possible):
Brake Sensors (optional):
Technical Equipment (multiple selection possible):
Fahrradzubehör:
Choose Battery:
Choose Charger:
IMPORTANT: Please measure your bottom bracket size and choose:
Choose Display
Bafang BBS Display Eggrider V2 Bluetooth
Bafang BBS Display Eggrider V2 Bluetooth
   
Bafang BBS Display DPC18 with 5-button-remote
Bafang BBS Display DPC18 with 5-button-remote
   
No selection
No selection
€0.00 *
Choose Chainring
Lekkie chainring with 42 teeth
Lekkie chainring with 42 teeth
   
Bafang BBSHD Original Steel Chainring 46T
Bafang BBSHD Original Steel Chainring 46T
   
Bafang BBSHD Luna Eclipse 42T chainring
Bafang BBSHD Luna Eclipse 42T chainring
   
Lekkie chainring with 28 teeth
Lekkie chainring with 28 teeth
   
Lekkie chainring with 36 teeth
Lekkie chainring with 36 teeth
   
Lekkie chainring with 46 teeth
Lekkie chainring with 46 teeth
   
Lekkie chainring with 52 teeth
Lekkie chainring with 52 teeth
   
Aluminium chainring with 42 teeth
Aluminium chainring with 42 teeth
   
No selection
No selection
€0.00 *
Choose Cranks
170 mm Bafang cranks
170 mm Bafang cranks
   
No selection
No selection
€0.00 *
Choose Throttle
Bafang BBS Stock Thumb Twist Throttle
Bafang BBS Stock Thumb Twist Throttle
   
Bafang BBS Left Thumb Throttle
Bafang BBS Left Thumb Throttle
   
Bafang BBS Right Thumb Throttle
Bafang BBS Right Thumb Throttle
   
No selection
No selection
€0.00 *
Tools (multiple selection possible)
Bafang BBS mounting tools
Bafang BBS mounting tools
   
Bafang BBS M33 mounting tool axle screw and nut
Bafang BBS M33 mounting tool axle screw and nut
   
Bottom bracket puller for Octalink, ISIS, Square tool
Bottom bracket puller for Octalink, ISIS,...
   
Recommended (multiple selection possible)
Gearsensor for Bafang BBS, Intelligent shifting sensor with HIGO connector
Gearsensor for Bafang BBS, Intelligent shifting...
   
Velcro Stretch Sleeve, Wire Cover
Velcro Stretch Sleeve, Wire Cover
   
Spiral Wrapping Band Black, Cable Ø 6–30mm
Spiral Wrapping Band Black, Cable Ø 6–30mm
   
Brake Sensors (optional)
Bafang BBS E-brake sensor for hydraulic brakes
Bafang BBS E-brake sensor for hydraulic brakes
   
Bafang BBS brake levers for mechanical brakes
Bafang BBS brake levers for mechanical brakes
   
Magura MT5e Hydraulic Disc Brake for Bafang
Magura MT5e Hydraulic Disc Brake for Bafang
   
Magura Brake Disc MDR-C 203 mm
Magura Brake Disc MDR-C 203 mm
   
Technical Equipment (multiple selection possible)
Bafang BBS programming cable USB
Bafang BBS programming cable USB
   
Bafang BBS and CYC Splitter Cable Brake Gearsensor
Bafang BBS and CYC Splitter Cable Brake Gearsensor
   
Bafang BBS 2 mm Spacer bottom bracket
Bafang BBS 2 mm Spacer bottom bracket
   
Bafang BBSHD Chain Ring Spacer 2 mm
Bafang BBSHD Chain Ring Spacer 2 mm
   
Gearsensor Shifting cable adapter
Gearsensor Shifting cable adapter
   
Bafang BBSHD motor protection
Bafang BBSHD motor protection
   
Fahrradzubehör
Bicycle Bottle FIDLOCK TWIST
Bicycle Bottle FIDLOCK TWIST
   
Bicycle Handlebar Smartphone Base Vacuum
Bicycle Handlebar Smartphone Base Vacuum
   
Fidlock Hermetic Dry Bag
Fidlock Hermetic Dry Bag
   
Bicycle Water Bottle Holder
Bicycle Water Bottle Holder
   
Choose Battery
Bottle Mount Battery Jumbo Shark ca. 900Wh
Bottle Mount Battery Jumbo Shark ca. 900Wh
   
Bottle Mount Battery Super Shark 730Wh
Bottle Mount Battery Super Shark 730Wh
   
No selection
No selection
€0.00 *
Choose Charger
6A Akku Ladegerät 58,8V 14S Li Ion mit 3 Spannungseinstellungen
6A Akku Ladegerät 58,8V 14S Li Ion mit 3...
   
4A Battery Charger 58.8V 14S Li Ion
4A Battery Charger 58.8V 14S Li Ion
   
2A Battery Charger 58.8V 14S Li Ion
2A Battery Charger 58.8V 14S Li Ion
   
No selection
No selection
€0.00 *
IMPORTANT: Please measure your bottom bracket size and choose
Bottom Bracket Size 68-76 mm
Bottom Bracket Size 68-76 mm
   
Bottom Bracket Size 77-94 mm
Bottom Bracket Size 77-94 mm
   
Bottom Bracket Size 95-102 mm
Bottom Bracket Size 95-102 mm
   
Bottom Bracket Size 103-124 mm
Bottom Bracket Size 103-124 mm
   
No selection
No selection
€0.00 *
Prices incl. 19% VAT plus shipping costs
Viewed