>>> CONFIGURE NOW <<<
Kostenloser Versand ab € 200,- Bestellwert
Schneller Versand vom Lager DE und AT
Kostenlose Beratung
Kostenlose Hotline 0800 123 454 321
 

Spare Parts for CYC X1 Pro and X1 Stealth

In this category you will find some spare parts and other accessories for your CYC X1 PRO and X1 STEALTH system. Chainrings, display, controller - and also sensors are available. Further details can be found in the product description. This collection is constantly being expanded - please contact us, if you don´t find the part you need.

1 From 2
No results were found for the filter!
X6 Controller for CYC X1 Pro und Stealth Gen3
Controller for use with CYC X1 Pro und Stealth Motors This controller is a replacement for the ASI BAC855 controllers and is only compatible with X1 Pro und X1 Stealth motors . For an upgrade from Gen2 to Gen3, we recommend installing...
€299.99 *

Ready to ship today,
Delivery time appr. 1-8 workdays

CYC X1 Pro 219h chain sprocket
219H chain sprocket for cyc x1 pro motor. Only compatible with freewheel 1.0. On this chainring you can mount a standard chainring with 104 BCD. Not compatible with x1 stealth motor.
€59.99 *

Ready to ship today,
Delivery time appr. 1-8 workdays

E-Bike Headlights CYC
E-Bike Headlights from CYC These headlights from CYC are ideal for riding at night or in poor visibility. They have 2 light modes - high beam and low beam. Included are 2 lights for the front sidde - these are mounted on the handlebar...
€89.99 * €99.99 *

Ready to ship today,
Delivery time appr. 1-8 workdays

CYC X1 Pro Complete Gearbox
This gearbox fits the CYC X1 Pro Motor (not compatible with Stealth Motor) and is located directly on the motor. The planetary gearox comes with brass gears. Also included is a Mollykote grease bag to lubricate the gears.
€299.99 *

Delivery time not available

CYC X1 Pro and Stealth Freewheel 2.0
This freewheel is compatible with the corresponding 2.0 219H chain sprocket of Gen2. BSA and BB92 version use the same freewheel - but with different spacer sets. This freewheel is compatible for both BSA and BB92 Motor Version. Not...
€119.99 * €129.99 *

Ready to ship today,
Delivery time appr. 1-8 workdays

CYC X1 Gen2 Cranks for X1 Pro and Stealth
Square cranks for CYC Gen2 Motors The crank arm length (hole spacing) is available in 165 mm and 170 mm (simply select above). The scope of delivery includes both cranks (left and right). When mounting, the correct pedal side should be...
€69.99 *

Ready to ship today,
Delivery time appr. 1-8 workdays

CYC X1 Stealth Brass Gears
Gearbox brass gears for X1 Stealth Motor These 3 gears are located in the gearbox of the stealth motor and replace the original gears of the planetary gearbox. Also included are the bearings and some grease for lubrication. Dimensions:...
€59.99 *

Ready to ship today,
Delivery time appr. 1-8 workdays

BB92 to BSA Adaptor
BSA Adaptor for BB92 Bottom Bracket With these adapter cups (for left and right side of bottom bracket), the cyc x1 pro and stealth motors (both Gen3) as well as the Photon Motor can be installed on BB92 bottom brackets. The outer...
€29.99 *

Ready to ship today,
Delivery time appr. 1-8 workdays

CYC X1 Pro Motor Sprocket
The small sprocket for cyc x1 pro motor This little sprocket is located on the right side of the motor (underneath the front cover) and drives the golden drive chain. There are 2 different sprockets (select above): 11T (11 teeth): for...
€49.99 *

Ready to ship today,
Delivery time appr. 1-8 workdays

CYC Gen2 Torque sensing bottom bracket for x1...
Torque sensor axle for Gen2 motors X1 Pro and Stealth The axles are equipped with the torque sensor and are available for both BSA 68-83, as well as BB92 (select above) bottom brackets. Important: These axles are compatible with ASI BAC...
From €169.99 * €189.99 *

Ready to ship today,
Delivery time appr. 1-8 workdays

CYC X1 Mounting Bashguard for BAC855 Controller
Mounting Part for ASI BAC 855 Controller This bracket can be used with both CYC X1 Pro and X1 Stealth motors. It is used to mount the ASI BAC 855 controller between the CYC motor mounting plates. The 4 screws and nuts for mounting are...
€19.99 * €49.99 *

Ready to ship today,
Delivery time appr. 1-8 workdays

CYC X1 Pro Carbon Front Cover
Carbon front cover for the CYC X1 Pro Motor This cover is mounted on the motor in the area of drive sprocket and chain tensioner, i. e. next to the chainring. Since there is only a little space between chainring cover and this front...
€19.99 * €24.99 *

Ready to ship today,
Delivery time appr. 1-8 workdays

1 From 2

Questions about these products?

If our detailed product description can´t answer all your questions, please write an email or give us a call - we will help you!

Viewed