Configure your e-bike retrofit kit with the CYC X1 Stealth motor

In this configurator, you can put together your retrofit kit with the 1500W CYC X1 Stealth mid-motor. This motor is compatible with different pressfit and BSA bottom brackets – there are corresponding width versions of the motor for this. To do this, you should measure the bottom bracket width (bottom bracket width) of your bike beforehand and then select the corresponding version of the motor. You can find out how to measure this width on your bike here:

Measuring the bottom bracket width on the bike - here's how >>

The best way to do this is to turn the bike over. Only the frame width is measured – make sure that no bearing shells are measured against the frame. If you are not sure, you are welcome to send us a photo. It is even easier to determine the width after removing the bottom bracket.

You can save your configuration using the SAVE button. If you are logged into your customer account, you can edit your configurations at any time.

Configure stealth set

Required
Motor
Display
Kettenblatt
Kurbelarme
Akku
Ladegerät
Montagewerkzeug

Erforderliche Komponenten

Motor
— Choose —
— Collapse —
Display
— Choose —
— Collapse —
Kettenblatt
— Choose —
— Collapse —
Kurbelarme
— Choose —
— Collapse —
Akku
— Choose —
— Collapse —
Ladegerät
— Choose —
— Collapse —

Empfohlene Produkte

Montagewerkzeug
— Choose —
— Collapse —
Kabelsammlung
— Choose —
— Collapse —

Optionale Artikel

Gashebel
— Choose —
— Collapse —
Bremssensoren
— Choose —
— Collapse —
Fahrradzubehör
— Choose —
— Collapse —

When using this drive unit on public roads and paths, the applicable regulations of your country must be observed and the settings on the motor with regard to maximum power and speed must be made accordingly. The user is responsible for complying with these regulations. Otherwise, this product may only be used on private and secured terrain!