>>> CONFIGURE NOW <<<
 

Cycle Analyst and accessories

In this category you will find Cycle Analyst and many different accessories for this system. Speed sensor, shunt, potentiometer, programming cable, mounting bracket, pas sensors, buttons and switches are available. More details can be found in their product description.

1 From 2
No results were found for the filter!
Speedometer Sensor for Cycle Analyst
For use with Cycle Analyst Speedometer Sensor for converting a CA-DP into a CA-DPS device. Cable length: ca. 100 cm Manufacturer: Grin Installation and soldering details
€29.99 *

Ready to ship today,
Delivery time appr. 1-8 workdays

Singatron Connector 15A for Satiator Charger
Output Connector for Satiator Charger Replacement 3 Pin Singatron DC output connector for Satiator charger. Please note this connector is difficult to swap out as there is a filter PCB soldered on directly to the leads inside the...
€19.99 *

Delivery time 21 Workdays

Potentiometer CA3
Allows stepless ebike adjustings while riding 5kOhm Auxilliary Input Pot for CA3 devices with CNC machined aluminium handlebar clamp for securing to 22 mm (7/8") handlebars. Allows you to adjust any of the speed, power, current or PAS...
€39.99 * €46.99 *

Ready to ship today,
Delivery time appr. 1-8 workdays

Cycle Analyst V3 DPS direct plug in with...
Cycle Display with lots of displayed values With the CA the controller can be programmed and has a connection for the temperature sensor of the motor Dimensions: 128 x 57 x 26 mm 140cm cable terminated with 6-pin JST-SM series connector....
€189.99 *

Delivery time 35 Workdays

rechts
ohne Stecker
TIP!
Domino Premium Full Twist Grip Throttle
Domino - the full twist Throttle for your E-Bike Original product from Domino (Italy) - designed for motor bikes, but also usable with E-Bikes. For the real Bike-feeling . For use with E-Bike systems, it has to be connected the right...
€99.99 *

Ready to ship today,
Delivery time appr. 1-8 workdays

Slim 3 Button Up/Down Digital Aux Input for...
3 Button Control for Cycle Analyst V3 Narrow profile 3 button, up/down digital Aux input for V3.1 Cycle Analyst firmware. Lets you change any limit or pedal assist setting up or down in a customizable number of steps. The wiring allows...
€24.99 * €34.99 *

Ready to ship today,
Delivery time appr. 1-8 workdays

3 Level Auxiliary Input Switch for Cycle...
For a quick mode change on Cycle Anaylst This 3 way switch is used as an auxiliary input device for the V3 Cycle Analyst. It has resistors inside to produce 3 different voltages (1.6, 2.5, and 3.3V) for each switch position and can be...
€12.99 * €19.99 *

Ready to ship today,
Delivery time appr. 1-8 workdays

Programmierkabel für
Phaserunner
Cycle Analyst
Cycle Satiator
Programming cable USB TTL for Cycle Analyst,...
This cable is used to program, update and log the Cycle Analyst , Phaserunner and Satiator with a Computer. Cable length: 300 cm It is equippent with a genuine FTDI FT232R chipset, probably you need to install the driver Works for Cycle...
€19.99 * €31.99 *

Ready to ship today,
Delivery time appr. 1-8 workdays

Cycle Analyst Mounting Bracket Holder
Steel mounting bracket for Cycle Analyst Ahead Steerer Tube Mount for Cycle Analyst (it is not Grin Manufactured). 1/4" Bolt Hole for Cycle Analyst. fits over 1 1/8" steerer tube 2 mm stainless steel the adapter can be bendet as you like...
€12.99 * €15.99 *

Ready to ship today,
Delivery time appr. 1-8 workdays

Cycle Analyst Shunt 100A cont. 0.5 mOhm
Resistor for your ebike project 0.5 mOhm external shunt for Cycle Analyst. Manufacturer Grin says they can handle up to 150A continuous, 400A peak. It says 100A on the shunt. Dimensions: 134 x 29 x 28 mm
€24.99 * €39.99 *

Ready to ship today,
Delivery time appr. 1-8 workdays

Cycle Analyst Shunt 200A cont. 0.25 mOhm
0.25 mOhm external shunt for Cycle Analyst Grin says they can handle up to 300A continuous, 800A peak. It says 200A on the shunt. Dimensions: 134 x 29 x 28 mm
€24.99 * €39.99 *

Ready to ship today,
Delivery time appr. 1-8 workdays

Cycle Analyst Shunt 50A cont. 100A peak
Precision 1mOhm Stand Alone Shunt With Pigtail Leads and 6-Pin CA-DP Plug. Includes Throttle Pass-Thru. Molded 1mOhm stand alone Cycle Analyst shunt with pass thru of throttle and speedo wires for 3rd party controller integration.
€19.99 * €39.99 *

Ready to ship today,
Delivery time appr. 1-8 workdays

1 From 2

Questions about these items?

If our detailed product description can´t answer all your questions, please write an email or give us a call - we will help you!

Viewed