>>> CONFIGURE NOW <<<
 

Spare Parts for your Bafang BBS01 or Bafang BBS02 System

Here you will find the necessary spare parts to repair your Bafang BBS01 or Bafang BBS02 motor. Also spare components of this system are included, for example speed sensor, crank bolts or cranks. You can see the compatibility with your system by checking the product name. Here you can find a picture with the named motor parts, incl. linked products.

3 From 3
No results were found for the filter!
Bafang BBS01 BBS02 Axle
Original Axle for the Bafang BBS01 and BBS02 There are different versions out there. Look in the picture for the right one. Length = 160 mm Doesn't work with BBSHD.
€47.99 *

Ready to ship today,
Delivery time appr. 1-8 workdays

Bafang BBS Bearing axle
Bearing for axle of Bafang BBS Motor 3 piece bearing, Original product of the Bafang BBSHD, BBS01 and BBS02 Outer diameter 25,8 mm, inner 17,2 mm, total height 6,5 mm The price is for one set!
€17.99 *

Ready to ship today,
Delivery time appr. 1-8 workdays

Bafang BBS02 Controller 750W 25A Version A
Version A controller for Bafang BBS02 motors The original Bafang BBS02 controller with 750W and 25A works with 48v batteries. If you need less watts you can change the controller-settings (reduce amps) by using our programming cable ....
€189.99 *

Ready to ship today,
Delivery time appr. 1-8 workdays

Bafang BBS01 BBS02 PAS Disc Ring
PAS disc for detection of crank movement This disc is filled with magnets which send an impulse to the pas sensor. If the BBS01 or BBS02 motor no longer suppors when pedaling, then it may be an issue with this PAS disc, the PAS sensor or...
€26.49 *

Ready to ship today,
Delivery time appr. 1-8 workdays

Bafang BBS01 BBS02 complete Axle with Gearing
Complete spare part set for your Bafang BBS Motor Including circlip, bearing, freewheel and PAS (not on the pic). Original product for the Bafang BBS01 and BBS02, version B We also recommend to change the pinion gear , if worn out....
€169.99 *

Ready to ship today,
Delivery time appr. 1-8 workdays

Bafang BBS01 BBS02 Pawl Clutch Pawl
Original Bafang part, not suitable for BBSHD  How to change it Remove circlip and pull PAS up The best way to open screws is with a high-torque screwdriver, with some pressure down. Important: use a old cloth or gloves, the edges are...
€29.99 *

Ready to ship today,
Delivery time appr. 1-8 workdays

Bafang Wiring Harness EB-BUS Splitter
Original Bafang main wiring harness The main wiring harness connects the motor with the devices on the handlebar. Display, throttle, gearsensor and brake sensors are connected with this harness. This version offers 4 connectors: 1x...
€39.99 *

Ready to ship today,
Delivery time appr. 1-8 workdays

Bafang BBS Speed Sensor and Magnet Replacement
Original Bafang Speedo Set, suitable for BBSHD, BBS02 and BBS01. Included are these components: Speedsensor Mounting Bracket Magnet I had a report, that the sensor did work only horizontaly, check that first.
€31.99 *

Ready to ship today,
Delivery time appr. 1-8 workdays

Bafang BBS01 BBS02 Gasket
Gaskets for the Bafang BBS01 and BBS02 motor These Bafang mid drive motors have different gaskets. These are located between housing and component - for example controller or stator. The gasket on the drive side is already integrated in...
€12.99 *

Ready to ship today,
Delivery time appr. 1-8 workdays

Bafang BBS Crank Set left and right
Original Bafang crank arms for BBS01, BBS02 and BBSHD Motors The length of these cranks is 170 mm. This length refers to the hole spacing of the crank (mounting area - pedal area). This product contains both sides - left and right crank....
€34.99 *

Ready to ship today,
Delivery time appr. 1-8 workdays

3 From 3

Article not found?

Your needed spare part for Bafang BBS01 or Bafang BBS02 is not included? Please let us know and send an e-mail. Note: Spare Parts for Bafang BBSHD can be found HERE.

Viewed