Register now for our newsletter!

Subscribe to our free newsletter now and don´t miss any more promotions and news.

Bitte geben Sie eine gültige eMail-Adresse ein.
>>> CONFIGURE NOW <<<
 
1 From 6
No results were found for the filter!
Bafang BBS Crank Shaft Seal Bottom Bracket
Outer rubber seal on the Bafang axle This rubber seal is often damaged when disassembling the axle. It is simply pressed in by hand and is located between axle and housing on the left side of the axle. The seal for the Bafang BBSHD motor...
From €11.99 *
Bafang BBS01 Controller 250W 36V Version A
Version A Controller for Bafang BBS01 Motors The original Bafang BBS01 controller with 250W and compatible with 36V (10S) Batteries. Version A is the old motor/controller version - you can see the difference in the shape of this...
€179.99 *
CYC X1 Mounting Bashguard for BAC855 Controller
Mounting Part for ASI BAC 855 Controller This bracket can be used with both CYC X1 Pro and X1 Stealth motors. It is used to mount the ASI BAC 855 controller between the CYC motor mounting plates. The 4 screws and nuts for mounting are...
€39.99 * €49.99 *
CYC X1 Pro Carbon Front Cover
Carbon front cover for the CYC X1 Pro Motor This cover is mounted on the motor in the area of drive sprocket and chain tensioner, i. e. next to the chainring. Since there is only a little space between chainring cover and this front...
€19.99 * €24.99 *
CYC Stock Display 36-52V
Display for CYC Motor with Stock Controller Original stock display from CYC for X1 Pro Gen2 Motors (not with BAC Controller compatible). Features: Display outer diameter ca. 55 mm Screen shows most important information 3 integrated...
€99.99 * €119.99 *
CYC Stock Controller Wiring Harness EB-BUS...
This wiring harness only fits for CYC stock controllers (not for use with BAC Controller). 4 in 1 with connectors: 1x Throttle (3 Pin Higo connector yellow - male) 1x Display (7 Pin Higo connector black - male) 1x Brake Sensor (3 Pin...
€19.99 * €34.99 *
CYC X1 Freewheel 1.0
CYC X1 Freewheel Version 1 This product can be used with the following CYC Motors: CYC X1 Pro Gen2 CYC X1 Stealth You can select above whether the freewheel is used for the BB92 version of the CYC mid drive motor (freewheel without...
€49.99 *
CYC X1 Speedsensor and Magnet Replacement
Original CYC Speedsensor incl. Bracket and Magnet. This product fits for CYC X1 Pro and X1 Stealth Motors. The yellow 3-pin HIGO Plug will be connected with the cableset of BAC Controllers.
€39.99 *
CYC X1 Golden Drive Chain
Golden Drive Chain for CYC Motors This motor chain connects the motor sprocket with the drive chain sprocket. Since the x1 pro and x1 stealth motors have different dimensions, these drive chains also have different lengths. Please select...
€49.99 *
7-11 Speed Gear with Freewheel, DNP
Screw-on type freewheel with 11T high gear This rim is screwed onto the hub motor. In addition, washers are included with the larger freewheels. You will need a special tool to remove this cassette, because the sprocket set has a...
From €29.99 *
CYC X1 Pro Stock Brake Sensor
Brake sensors for CYC X1 Pro with stock controller This ebrake sensor is a reed switch with magnet, it is plug and play compatible with the CYC X1 Pro Motors with stock controller (not suitable for BAC controllers). The motor will cut...
€19.99 * €39.99 *
CYC Half Twist Throttle right
Original CYC Half Twist Throttle - with 3-pin HIGO connector This throttle secures to the inside diameter (ID) of the handle bar - not the outside. The handlebar tube ID needs to be at least 17 mm. If you have less, you can remove some...
€31.99 *
1 From 6
Viewed