Complete E-Bike Conversion Kit with brandnew CYC X1 PRO Gen3 mid drive motor
This is a complete conversion kit for you and your bike - with all necessary parts!
Order | Assemble | Ride
This set contains the following components:
- CYC X1 Pro (gen3) mid drive motor, incl. cables and mounting parts
- New X6 Controller
- ISIS axle
- Speed sensor and magnet
- Original CYC cranks 175 mm (165 mm on request)
- Chainring 38T, incl. golden drive chain, freewheel and torque sensor
- DS 103 Display
- Thumb Throttle
- Charger 2A
- 730Wh 52V Bottle Mount Battery Super Shark
The specification "730Wh" refers to the battery capacity (730W can be provided for appr. 1h) and has nothing to do with the max. power. With this conversion kit you can reach a max. Power of appr. 2000 W. To use the full motor power (up to 5000W), the use of an appropriate battery (72V, high discharge current rate, BMS - not available from us) is required. If you want to use other set-components, please use our configurator.
This set is suitable for most bikes. To be sure it fits your bike as well, please note the following points:
1) Bottom Bracket Size:
|Since this motor is available for different bottom bracket widths, please measure your bike and select afterwards above. We recommend to invert the bike and measuring the frame width at the bottom bracket. In the picture below you can see the bottom bracket - measuring only the frame width (68 mm in the following picture).|
2) Bottom Bracket Diameter:
The motor axle is compatible with BSA-variant. If your bike has a pressfit bottom bracket, you will have to use a PF to BSA adapter (not included) - or you use the X1 Stealth Motor instead. If your bottom bracket width is more than 75 mm, it´s possible that your bottom bracket may have 41 mm inner diameter. We recommend to remove your bottom bracket, then you can easily measure the diameter:
->If it´s about 33/34 mm and size between 68 and 83 mm: choose BSA 68-83mm above
->If it´s about 41/42 mm and size between 90 and 92 mm: use a PF to BSA adapter or the X1 Stealth Motor
Please send a photo to email@example.com if you are not sure - we will help you!
The new X6 Controller can be connected to your smartphone by using bluetooth. After installing the new CYC App the motor settings can be changed to your preference without using a cable.
The new controller is one of the most significant updates for the new generation. The X-Controller Series is designed for you with in-house firmware giving way to optimized pedal assist and throttle experience. There will be 2 versions, namely the x6 (replacement for bac 855) and x12 (replacement for bac2000).
|Nominal Voltage||36 - 72V||36 - 72V|
|Peak Phase Current||110A||180A|
|Peak Battery Current||65A||100A|
|Display Compatibility||APT 500c, APT 750c, SW102, DS103||APT 500c, APT 750c, SW102, DS103|
|CYC Product Compatibility||X1 Pro Gen2 & 3, X1 Stealth Gen1 & 3||X1 Pro Gen2 & 3|
The new Gen3 PAS (pedal assist system) sits integrated with the freewheel module so there´s no external wiring that can get caught, bent, or accidentally snapped. The CYC PAS runs with both the torque and cadence signal collected and is processed by the new controller to provide you with a pedal assist feeling like never before.
Instant torque and power, stable off road performance, responsive throttle, refined pedal assist experience - the x-series controllers are the key components to power all CYC motor systems. Introducing the CYC Ride Control mobile app, aimed to unleash all the possibilities at your fingertips. Experience an advanced settings selection and an on-the-go mode on the horizon.
Motor manufacturer information:
- 3000W (X6 Controller) & 5000W (X12 Controller)
- Weight Motor and Controller: ca. 3,7 kg
- Total weight (without battery): ca. 5,0 kg
- Max. Torque: 150 Nm bzw. 250 Nm
Gen3 Upgrades Overview:
Attention: Please observe the regulations of your country if you use this drive unit on public roads and paths. If so, you have to adjust the motor settings - in particular max. power, speed and throttle - according to these regulations. The user is responsible for compliance with these regulations. Otherwise, this product may only be used on private and secured terrain!