E-Bike Controller Baserunner with Z910 motor plug
The Baserunner_Z9 is a compact field-oriented motor controller and enclosure that fits inside the Hailong and Reention downtube battery cradles. It is compatible with up to 14s (58V) battery packs (24-52V batteries, max. 60V output), handles up to 55A peak phase current (30A continuous), and is terminated with an Z910 waterproof HiGo motor plug. V3 Model has a demux circuitry on the white signal wire of the Z910 cable to support motor temperature sensors, wheel speed sensors, and also combined temp/speed signaling. Requires PC setup to mate and configure with a given motor, and this requires this programming cable. If your battery doesn´t have an on/off switch you should expect to wire in a separate switch.
Specifications:
Dimensions (LxWxH, mm) | 90 x 55 x 15 |
Actual Weight | 0,20 kg |
Max. Battery Amps | 30A |
Battery Range | 20-60V |
Low Voltage Cutoff | Programmable |
It has the following 2 signal plugs:
- 8-pin HIGO plug for connecting Cycle Analyst V3 (CA3-WP)
- 3-pin JST-SM connector for direct throttle hookup. Inside the heathshrink are unterminated leads for on/off switch and optional fwd/rev inputs.
The Baserunner Z9 has bare + and - lead wires that will need to be soldered to the pins of the connector present in your original base plate (battery slider).
Made by Grin (Canada). More Product information