30A 20-60V Baserunner Motor Controller Z910

€289.99 *

Prices incl. 19% VAT plus shipping costs

Delivery time 21 Workdays

Order number: 3114

Close menu

E-Bike Controller Baserunner with Z910 motor plug

The Baserunner_Z9 is a compact field-oriented motor controller and enclosure that fits inside the Hailong and Reention downtube battery cradles. It is compatible with up to 14s (58V) battery packs (24-52V batteries, max. 60V output), handles up to 55A peak phase current (30A continuous), and is terminated with an Z910 waterproof HiGo motor plug. V3 Model has a demux circuitry on the white signal wire of the Z910 cable to support motor temperature sensors, wheel speed sensors, and also combined temp/speed signaling. Requires PC setup to mate and configure with a given motor, and this requires this programming cable. If your battery doesn´t have an on/off switch you should expect to wire in a separate switch.

Specifications:

Dimensions (LxWxH, mm)	90 x 55 x 15
Actual Weight	0,20 kg
Max. Battery Amps	30A
Battery Range	20-60V
Low Voltage Cutoff	Programmable

It has the following 2 signal plugs:

8-pin HIGO plug for connecting Cycle Analyst V3 (CA3-WP)
3-pin JST-SM connector for direct throttle hookup. Inside the heathshrink are unterminated leads for on/off switch and optional fwd/rev inputs.

The Baserunner Z9 has bare + and - lead wires that will need to be soldered to the pins of the connector present in your original base plate (battery slider).

Made by Grin (Canada). More Product information

Available downloads: