Questions about these tools?
If our detailed product description can´t answer all your questions, please write an email or give us a call - we will help you!
No results were found for the filter!
CYC Photon Chainring Tool Tool for loosening the Photon Chainring This tool makes it very easy to remove the chainring from the Photon Motor. Simply place the pins in the holes provided on the chainring retaining cover and then use a wrench (with nut) to loosen...
€39.99 *
Ready to ship today,
Delivery time appr. 1-8 workdays
Bafang BBS01 BBS02 axle tool To remove both lock nuts on Bafang BBS01/02 axle With this tool it´s easy to remove both lock nuts on the axle of the Bafang BBS01 and BBS02 motors. This is necessary if you want to change the bearings behind, the PAS disc, clutch or...
€29.99 *
Delivery time 21 Workdays
CYC bottom bracket wrench Hollowtech II Mounting wrench for CYC Motors This tool can be used to mount mid drive motors, as well as to dismount the bicycle bottom bracket: Mounting: Torque sensor axle of CYC X1 Pro and X1 Stealth motor Disassembly: Shimano Hollowtech II...
€19.99 *
Ready to ship today,
Delivery time appr. 1-8 workdays
EMPFOHLEN
Montagetool
für 1. Sicherungsring
Drehmoment
Bafang BBS axle tool locking ring nut M33 Mounting tool for the first lockring to mount your Bafang BBS01, BBS02 and BBSHD motor Recommended torque is 50-60 Nm, Material: made of steel Use this tool with a 1/2" torque wrench, blue Loctite use on the thread is also recommended....
€34.99 *
Ready to ship today,
Delivery time appr. 1-8 workdays
EMPFOHLEN
Montagetool
für 2. Sicherungsring
Drehmoment
Ausbau Hollowtech 2
TIP!
Bafang BBS axle tool locking ring nut second ring Tool for mounting Bafang BBS Motors Use this CroMo-Steel tool with a 1/2" torque wrench to fix the second lockring. Blue Loctite use on the thread is also recommended. You can use it also to unmount the BSA Shimano Hollowtech and SRAM...
€29.99 *
Ready to ship today,
Delivery time appr. 1-8 workdays
Bafang BBS axle tool locking ring nut M33 Mounting tool for the first lockring to mount your Bafang BBS01, BBS02 and BBSHD motor. Can be used just like the original Bafang nut . Recommended torque is 50-60 Nm. Use this tool with a 1/2" torque wrench, blue Loctite use on the...
€34.99 *
Ready to ship today,
Delivery time appr. 1-8 workdays
Demontagetool
Innenlager
Octalink
Bottom bracket puller for Octalink, ISIS,... Right Tool to remove the bottom bracket and assemble CYC Motors Cartridge B.B. tool to remove the original bottom bracket of your bike and make space for your new Bafang. It´s also necessary for mounting the CYC Motors - to fix the part...
€9.99 * €12.99 *
Ready to ship today,
Delivery time appr. 1-8 workdays
Montagetool
Alternative zu Nussen
für Sicherungsringe
Ausbau Hollowtech 2
Bafang BBS M33 mounting tool axle screw and nut Mounting tool for Bafang BBS Motors With this tool you can fix both mounting lockrings of Bafang BBSHD, BBS02 and BBS01 mid drive motors. The disadvantage compared to both mounting nuts: The recommended torque can not be observed. In...
€24.99 * €29.99 *
Ready to ship today,
Delivery time appr. 1-8 workdays
Demontagetool
für Vierkantkurbeln
Bike Crank Puller Tool for Square Taper Cranks Crank puller works with Bafang BBS01/02/HD and CYC cranks! In addition it can be used also for other standards. You can use a 15 mm wrench for both parts. We recommend to use blue Loctite on the crank screws when you mount the cranks...
€12.99 *
Ready to ship today,
Delivery time appr. 1-8 workdays
Chain Wear Indicator For checking the wear-related elongation of bicycle chains for aluminum cassettes or steel A chain can still be fully functional, but from a certain degree of wear it does not fit exactly in the sprockets. During use, the chain lengthens...
€11.99 *
Ready to ship today,
Delivery time appr. 1-8 workdays