Upgrade your bike with the most powerful mid drive electric bike kit from Bafang! Equipped with a 12fet controller with 30A and the possibility to use 14S 58,8V batteries, the motor provides 1.6 kW peak! Full stock on German warehouse!
Warning: Last items in stock!
|Weight ca. in kg||7 (complete set incl. display, crank, bolts)|
|estimated speed with 26" rim||60 km/h|
|motor connector||Anderson PowerPole 45|
Ideal for the realization of your S-Pedelec as a complete kit for an existing bike. With his powerful and quiet motor with 160 Nm you can climb everywhere. A easy installation and the power transmission on all bike gears also allow long mountain climbs without overheating. The Bafang BBSHD Impulsis is significantly more robust than its little brother BBS02 with 30A constant power available. It has a internal gear ratio of 21.9:1, which allows higher RPMs for a better efficiency.
This motor fits to bottom brackets from 68 to 120 mm:
68 mm = 68 to 75 mm
90 mm = 75 to 92 mm (e.g. Pressfit BB92)
100 mm = 90 to 100 mm
120 mm = 100 to 120 mm
The axle size is measured without the thread. eventually you need some washers, to have a flat triangle plate.
You can choose between different displays:
There are different chainrings available, with different offsets. Here are the links to the popular ones:
Alternative throttles are available and are offered as an option
You need a special tool for the axle, the second ring can be tighten with the bottom bracket bearing tool for Shimano, SRAM, … For the rest Allen tools are required
We recommend the use of the Gearsensor to have smooth gear changes
If you want to reprogram the controller settings use the programming service
INSTALLATION GUIDE from Luna Cycles
The motor axle has a diameter of 33.4 mm and is installed instead of the bottom bracket. A bicycle frame with BSA bearings (e.g. Shimano Hollowtech) has the appropriate diameter for the motor, with BB92 and BB30 bearings an individual adapter is required. Some of them we have here…
You can use 48V 13S and 52V 14S batteries, it doesn't work for 36V. You can set also a low voltage cutoff in the programming (40-43V)