Configure your conversion kit with CYC X1 Motors!
With this configurator you can choose your prefered components for your CYC X1 Pro or X1 Stealth E-Bike Conversion Kit (with the new generation 3 motors)! When selecting the chainring, make sure that this is also compatible with your chosen motor (last step). You can see this in the product description. The available CYC Motors (Pro and Stealth) are compatible with different Pressfit- and BSA bottom brackets. You should check this on your bike first. Please click on the motors in the last step to see how this works (measure bottom bracket size).
The battery connector on the new x6 controller is equipped with an xt90 plug. The Anderson Powerpole connector is used on the battery slider by the manufacturer. So when using our batteries with the cyc motors, we recommend to order the xt90-s connector - this product can also be selected in this configurator.
If you want to use 2 brake sensors in addition to the gearsensor, then the y-splitter cable is required. You can also find this product in this configurator. If you choose 1x gearsensor and 1x brake sensor, then you don´t need this splitter cable.
You can reach a max. power of appr. 2000W if you use our batteries. If you need more power, you should use 72V batteries with good cells (for example Sony VTC) and suitable BMS (lots of amps). Please observe the regulations of your country if you use this drive unit on public roads and paths. If so, you have to adjust the motor settings - in particular max. power, speed and throttle - according to these regulations. The user is responsible for compliance with these regulations. Otherwise, this product may only be used on private and secured terrain!