No products
Prices are tax included
for Bafang BBS-01, BBS-02 e BBS-HD
Diameter 2,5 mm2, with solder, Original Bafang part
Use it to mount your Gearsensor directly to the shifter or on your frame. Makes a tighter fit and straight shifting cable. Made specially for Gearsensor
Easily applied to electric harness, cables and wire bundles. Looks better and give you a better mechanical protection.
The spacer discs move the motor further outwards at the drive side. This is necessary if the dropout of the frame is too steep and the engine transmission touches the frame. Without the spacers, the engine housing will be distorted.
The spacer discs move the motor further outwards at the drive side. This is necessary if the dropout of the frame is too steep and the engine transmission touches the frame. Without the spacers, the engine housing will be distorted.
Set of original Bafang crank screws for BBSHD, BBS02 and BBS01Left and right M8
Essentially if you change something inside the motor (e.g. nylon gear, motor core) nad you have to cut out the silicone protection. Usually it breaks and it is hard to get them clean. Original product for the Bafang BBS01 and BBS02.
Essentially if you change something inside the motor (e.g. nylon gear, motor core) nad you have to cut out the silicone protection. Usually it breaks and it is hard to get them clean. Original product for the Bafang BBSHD
At minor repairs or mechanical stress, the silicone shells may tear. These are also stuck in the phase connections and can be damaged, because of the glue. BBS01 and BBS02 also use these connectors for the battery connection
Suitable for collecting and hiding cables, as well as protecting them from dirt
2 mm Spacer made for the Bafang BBSBBS01 and BBS02