250W E-Bike Conversion-Kit Bafang BBS01

This is a complete conversion-kit - with all necessary parts - for you and your bike! 

Order  |  Assemble  |  Ride

This conversion-kit contains the following components:

• 250W motor with all necessary cables and fixing parts
• Speed sensor
• Original cranks from Bafang
• Original chainring from Bafang with 46 teeth
• Plastic cover for chainring
• Color display DPC-18
• Original thumb throttle from Bafang
• Gearsensor
• Velcro strech sleeve
• Bottle mount battery (490 Wh Super Shark 10S 4P)
• Charger 2A 42V
• Mounting tool

Please use our set configurator if you want to assemble your set with other components!

This set is suitable for most bikes. To be sure it fits your bike as well, please note the following points: 

1) Bottom Bracket Size: 

Since this motor is available for bottom bracket widths from 68 to 75 mm, please measure your bike. We recommend to invert the bike and measuring the frame width at the bottom bracket. In the picture below you can see the bottom bracket - measuring only the frame width (68 mm in the following picture).

If your bottom bracket size is between 75 and 92 mm, it´s necessary to use this axle extension.If your bottom bracket size is more than 92 mm this motor doesn´t fit - we recommend to use our 1000W motor.

2) Bottom Bracket Diameter: 

The motor axle has a diameter of 33,4 mm and is installed instead of the bottom bracket. If your bottom bracket width is more than 75 mm, it´s possible that your bottom bracket has a bigger diameter (pressfit bearings) and you need an adapter. We recommend to remove your bottom bracket, then you can easily measure the diameter. If it´s about 33/34 mm - no adapter is required. If it´s about 41/42 mm - our pressfit adapter is required. Please send us a photo to welcome@fasterbikes.eu if you are not sure - we will help you!