Bafang BBSHD motor protection

Protects your Bafang Motor from damage

The sheet metal protects your Motor against stone chipping and damage caused by touching down on rocks or stones. In particular, the cable harness is well protected.

The plate has four fastening straps which are connected directly to the screw connections on the motor side (controller and stator screws). The straps are positioned on the outside - not between controller or stator and motor housing - so that the existing motor gaskets remain unaffected. In addition, the guard plate can be mounted in two different angular positions on the motor and thus adapted to the installation angle of the motor. Even if the motor has to be positioned slightly more downwards due to the frame, the sheet can still be mounted in the correct position.

What features should an motor guard have for an e-bike motor? We believe that it can deform in extreme cases, but it must not tear off or break. So it has to last a long time but it does not have to stay smooth after an incident (e.g. touching stones or rocks). It would be nonsense to construct it so stable that it would not deform under high forces. It would then either be very thick and thus very heavy or it would be very expensive due to expensive production technology (profiling by deep drawing, for example). Therefore, we think the ideal motor protecting plate must be a simple, lasered and bent 1.5mm stainless steel sheet. This makes it easy, sufficiently stable and cheap.

This product is a perfect fit for the Bafang BBSHD mid drive motor. If you want to use this motor guard for Bafang BBS01 or BBS02 Motors, the 4 mounting taps must be adjusted. Than it´s usable with Bafang BBS01/02 motors.

Here you can see how to mount this motor guard: